Titus Sobisch eXTReMe Tracker

Popular Posts

Friday, March 28, 2008

70 % gegen Bahnprivatisierung

Repräsentative Emnidumfrage von Bahn für Alle

70 Prozent der Bevölkerung lehnen jede
Kapitalprivatisierung ab und wollen eine Bahn in
öffentlicher Hand. Das hat eine repräsentative Befragung
des Meinungsforschungsinstituts Emnid im Auftrag von "Bahn
für Alle" ergeben. Die Entscheidung über die Zukunft der
Bahn ist für viele Menschen wichtig für ihre künftige
Wahlentscheidung, hat die Umfrage ebenfalls ergeben.

In keiner Partei gibt es eine Mehrheit für eine
Bahnprivatisierung. Unter Anhängern der SPD ist die
Ablehnung mit 73 Prozent besonders hoch.

Die Menschen messen der Zukunft der Bahn eine hohe
Bedeutung bei. Lediglich ein Drittel der Bevölkerung meint,
dass die Haltung der Parteien zur Bahnprivatisierung für
ihre Wahlentscheidung unwichtig sei.

Befragt wurden von Emnid am 25. und 26. März 2008
telefonisch 1006 Personen ab 14 Jahre.

Friday, March 14, 2008

Charakterisierung interpartikulärer Kräfte

Artikel in

Chemie Ingenieur Technik Volume 80, Issue 3 , Pages 393 - 397

Charakterisierung interpartikulärer Kräfte für Fest/Flüssig-Trennverfahren mittels Analytischer Zentrifugation

T. Sobisch, D. Lerche
Dispersionen • Partikel • Trennverfahren • Zentrifugation

Das Verhalten von Dispersionen, gekennzeichnet durch Entmischungs-, Fließ- und Packungsverhalten, wird durch Art und Stärke der interpartikulären Wechselwirkungskräfte bestimmt. Dies ist von grundlegender Bedeutung für die Anwendung von Dispersionen auf verschiedensten Gebieten aber auch für Fest/Flüssig-Trennverfahren. Der folgende Beitrag berichtet über die Anwendung der Analytischen Zentrifugation zur Untersuchung der Kinetik und Polydispersität von Trennprozessen sowie des Packungs- und Kompressionsverhaltens am Beispiel polydisperser Feinstpartikelsuspensionen. Die Analytische Zentrifuge misst die lokalen und zeitlichen Änderungen der Transmission mittels STEP-Verfahren. Innerhalb der untersuchten Feinstpartikelsuspensionen variiert der Grad der Partikelwechselwirkung von repulsiv bis stark attraktiv und deckt somit den gesamten Bereich typischer Trennaufgaben ab. Die Charakteristik der Trennprozesse (Einzelkorn- oder Zonensedimentation, freie oder behinderte Sedimentation, Konsolidierungsverhalten, Polydispersität) lässt sich aus der Form und dem Verlauf der gemessenen Transmissionsprofile bestimmen. Repulsive Partikelwechselwirkungen führen zu einem polydispersen Sedimentationsverhalten, d. h. die Teilchen sedimentieren mit unterschiedlicher Geschwindigkeit entsprechend ihrer Größe. Im Fall stark attraktiver Wechselwirkungen bewegen sich insbesondere bei hohen Volumenkonzentrationen alle Partikel gemeinsam mit dergleichen Geschwindigkeit. Wenn nur schwache Anziehungskräfte wirken, bildet sich eine Sedimentationsfront, die den Großteil der Partikel einschließt, ein Teil der kleineren Partikel zeigt aber weiterhin polydisperses Sedimentationsverhalten. Die erzielbare Packungsdichte wird gleichfalls durch die Stärke der Partikelwechselwirkungen bestimmt. Aus technologischer Sicht steht die Packungsdichte im direkten Zusammenhang mit der Entwässerbarkeit bzw. dem Entfeuchtungsverhalten sowie der Redispergierbarkeit. Für kolloidchemisch stabile Dispersionen (repulsive Wechselwirkungen) werden auch bei relativ geringer Zentrifugalbeschleunigung hohe Packungsdichten erreicht, die Sedimente sind nahezu inkompressibel. Bei polydispersen Systemen tritt in diesem Fall Partikelsegregation auf. Mit Zunahme der Anziehungskräfte zwischen den Teilchen ist ausgeprägtes Kompressionsverhalten zu beobachten, die Packungsdichte ist stark vom ausgeübten Zentrifugaldruck abhängig. Bei stark geflockten Systemen werden selbst bei sehr hohen Drücken nur moderate Entfeuchtungsgrade erzielt.

Friday, November 02, 2007

Paint products: Accelerated stability and quality testing

On line article at SpecialChem4coatings.com

Paint products: Accelerated stability and quality testing
Part I: Direct measurement of separation and segregation by multisample analytical centrifugation

Scope

To assure continued consumer satisfaction the following stability issues of paint products have to be minimized or avoided:

  • syneresis - separation of the liquid dispersion media
  • Pigment segregation - change of colour composition inside a container
  • Particle segregation - change of particle size distribution inside a container

These stability issues have to be addressed not only during development of new paint products but also for quality assurance during production on a regular basis. This application note demonstrates that multisample analytical centrifugation can be used as an efficient tool for the accelerated evaluation of separation stability of paint products.
In addition this technique provides for high resolution data of particle size distributions of pigments or emulsions.

In part II the application of multi-sample analytical centrifugation for optimization of deagglomeration of pigment particles will be addressed.

Formula V - Formulation Science and Technology 2007

Formula V 19 - 22 November Potsdam, Germany

' Formulating opens the way for tailoring products for specific applications and combining components with often contradicting properties. Formulation science and technology is a core discipline for industries and applications like home care, cosmetics, plant protection and coatings but also of emerging importance in fields like electronics, composite materials and biomedical technology.'

Poster contributions

Accelerated screening of formulations towards freeze-thaw stability

T. Sobisch, D. Lerche, L.U.M. GmbH, www.lum-gmbh.com

Rudower Chaussee 29, 12489 Berlin, Germany


The formulation of dispersion based products as well as process development/monitoring and quality assurance require efficient and objective analytical tools for shelf life prediction and stability determination. Freeze/thaw stability is often used as measure of long term stability. On the other hand high freeze/thaw stability is often required as a material property. To this end the potential of multisample analytical centrifugation was evaluated as an accelerated test procedure.
A new multisample approach is presented using analytical centrifugation (STEP-Technology), which allows for an accelerated characterization of destabilization processes (creaming, sedimentation, coalescence, phase separation). The kinetics of these destabilizing processes can be traced simultaneously for up-to 12 different samples with temperature control in the range between 4 and 60 °C.
Analytical centrifugation measures in a rapid way the inherent stability of the samples. Therefore, alterations due to accelerated aging by freeze/thaw cycling can be traced far more earlier than by naked eye.

The wide application potential of this approach is demonstrated by examples of measurements on paints, cosmetics and food products.


Thickener performance traced by multisample analytical centrifugation

T. Sobisch, D. Lerche, L.U.M. GmbH, www.lum-gmbh.com

Rudower Chaussee 29, 12489 Berlin, Germany


Polymeric thickeners are important ingredients to adjust flow properties and stability of formulations. The effect of polymeric additives on dispersion properties is rather complex (viscosity of the continuous phase, adsorption and depletion effects, interaction with other ingredients). Therefore optimum formulation requires extensive experimental investigations.

A new multisample approach is presented using analytical centrifugation (STEP-Technology), which allows for an accelerated characterization of separation stability. Even more, comparing measurements at different centrifugal acceleration information on flow properties is also available (Newtonian, shear thinning or thickening behaviour, yield point, compressive yield stress). The kinetics of separation can be traced simultaneously for up-to 12 different samples with temperature control in the range between 4 and 60 °C.
The potential of multisample analytical centrifugation for formulation design was demonstrated investigating the effect of particle (calcium carbonate, silica) and polymer (polyacryl amide) concentration on dispersion properties of different stabilized suspensions.


Friday, September 28, 2007

making palm oil production less polluting - the wastewater issue

besides the issue of rain forest destruction conventional palm oil production generates up-to 4 tonnes highly contaminated wastewater and more then 40 cubic meter methane per tonne of palm oil produced.

To reduce environmental impact German researchers have developed a treatment process using wastewater and plant residues of oil production for co composting.

Thursday, September 06, 2007

Concerns Over Bisphenol A

Human exposures are usually as high as those causing profound effects in rodents

"THE SUSPECTED LINK between low levels of human exposure to bisphenol A (BPA), a monomer widely used to make polycarbonate plastic and epoxy resins, and adverse health affects was bolstered last week with the publication of four toxicology studies that investigated the link.

The most significant paper is a consensus statement from 38 scientists released online in Reproductive Toxicology (DOI: 10.1016/j.reprotox.2007.07.005). It concludes that human exposure to BPA, primarily from food containers, is within the range shown to be biologically active in animal studies. In rodents, low BPA exposures in the womb cause increases in the rates of prostate and breast cancer, reproductive abnormalities, lowered sperm counts, early onset of puberty in females, and obesity and insulin-resistant diabetes."


.................
"Despite growing evidence of toxic effects in lab animals, manufacturers of BPA insist that their product is safe. Steven Hentges, executive director of the polycarbonate/BPA group at the American Chemistry Council, an industry group, disputes the new research in Reproductive Toxicology. He says it is not credible, pointing to a European Food Safety Authority report that indicated no adverse effects of BPA"

Tuesday, August 21, 2007

Risk due to endocrine effect of compounds used in personal care products

COMMENTARY: Do Personal-Care Products Need a Makeover? (By Gary Ginsberg)

E/The Environmental Magazine - Norwalk,CT,USA
'The typical surfactants, emulsifiers, oils and fragrances are
generally safe. However, as with many things, the devil is in the details
and it's the small ...'

problems associated with phtalates, parabens, benzophenons, bisphenol A, triclosan

What´s Toxic, What´s not


Powered by ScribeFire.

Thursday, July 05, 2007

depleted uranium amunition leads to groundwater contamination - Uranmunition im Boden führt zu radioaktiver Grundwasserkontamination

Langzeitstudie zur Auflösung von Uranmunition im Boden

"In einer bisher einmaligen Langzeitstudie haben Wissenschaftler vom GSF Forschungszentrum für Umwelt und Gesundheit in Kooperation mit dem Forschungszentrum Dresden-Rossendorf (FZD) untersucht, was mit panzerbrechender Uranmunition passiert, die lange im Boden lagert und damit Verwitterungs- und Auswaschungsprozessen ausgesetzt ist. Die Ergebnisse zeigen, dass die Munition schnell zersetzt wird und Uranverbindungen in das Grundwasser gelangen können."

Wednesday, May 16, 2007

Exposure to depleted uranium (DU) particles strongly increases risk of lung cancer

The Alchemist Newsletter: May 8, 2007

'Exposure to depleted uranium (DU) particles is a source of growing concern internationally as it increases the risk of lung cancer, according to John Pierce Wise Sr of the University of Southern Maine. Writing in the journal Chemical Research in Toxicology the researchers explain that DU has a density twice that of lead and so is used in military armor and munitions. However, DU dust produced in combat can lead to frequent and widespread exposure of military personnel and civilians during an after combat. Few studies have been undertaken, bit Wise and his colleagues have now tested the effects of DU on cultures of human lung cells. "This is the first report on the cytotoxicity and clastogenicity [chromosome damaging potential] of particulate and soluble DU in human bronchial cells," the researchers say.'